Autotest :

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing :

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing :

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing :

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting :

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold :

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Newton unit measurement :

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics :

Statistics function registers and analyses performed measurements. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range etc

Checkweighing :

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

Under-pan weighing :

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.

GLP Procedures :

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing :

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination :

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Holders for test tubes and filters
Radwag Laboratory Holders have been designed for faster and more convenient weighing. They ensure perfect and secure fixing of small vessels, both typical an ...

Displays
Additional LCD display in plastic housing and on a stand. The display enables presentation of the weighing result in a place distant from the balance wor ...

Barcode scanners
Power scanner D8330AR is a handheld device designed for exploitation in adverse industrial conditions. The scanner has an increased reading range and it is c ...

RS 232 cables (scale - Epson/Citizen printer)
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to an Epson or Citizen label printer. Standard cable length: 1,7m Compatible with: - Scales ...

Cigarette lighter receptacle power supply cables
Cable with jack for plugging to a car lighter 12V (PUE C31). Standard cable length: 1,7m Compatible with: - Scales operated by means of PUE C31 indicator - ...

Power loop output
RADWAG power loop module 4-20mA is designed for conversion of digital form of mass readout into analog one. Power output is a passive module, i.e. requir ...

Power Adapters
The power adapter ZR-02 is designed for powering a balance in areas with no access to mains. It features a built-in charger. The adapter enables op ...

ALIBI READER
Alibi Reader was designed to make reading of the measurements that have been carried out by the R and X2 series balances and stored in the Alibi memory possible ...

R-LAB
R-Lab is an up-to-date program offering aquisition of measurements sent from RADWAG-manufactured balances, their presentation and statistical analysis. The prog ...

LabVIEW Driver
LabVIEW ?Radwag Balances & Scales? driver is used to support Radwag-manufactured weighing instruments operating in LabView environment. Since this driver was pr ...

Workstation for pipettes calibration
In order to ensure measurement traceability, meet all the requirements resulting from supervision over measuring equipment and to facilitate the process of ...

Antivibration tables for laboratory balances
SAL/C anti-vibration table for laboratory balances has been designed to satisfy the user with the greatest possible measurement stability. The table provides co ...

Professional weighing table
A professional weighing table is designed to cooperate with microbalances, analytical balances and it is sucessfully used as a stand for pipettes calibration ...

RAD-KEY
Establishing cooperation between a weighing instrument and a computer: replacing a comma with a dot (useful when exporting data to Excel spreadsheet); Hot key (i.e. function keys from F1 to F12) triggering mass readout from a weighing instrument; data acquired from a weighing instrument are read as text or numeric values. The latest software version: 1.1.0.7

RADWAG Development Studio
RADWAG Development Studio is a software intended for companies willing to develop their own tools for communication with RADWAG-manufactured weighing equipment....

Receipt printer
TM-T20II printer is a user-friendly device uncomplicated when it comes to its configuration and maintenance. The printer works with most of the operating systems. It offers a build-in power supply, USB cable, wall mainframe and conversion set....

Granite Antivibration tables
Table SAL/STONE/C is designed for ensuring stable operating conditions for high precision measurements. The table top is manufactured from polished granite and it is based on mild steel, metal construction.

Under-hook weighing rack
Under-hook weighing rack for AS and PS balances This image is for reference only. Product code: WX-002-0111 Request for quotation Overview A rack for under-hook weighing intended for balances AS and PS. The rack is designed for weighing loads requiring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

R.Barcode
The basic function of R.Barcode software is presentation of the data sent by barcode scanners connected to PC via USB or RS232. The software also works with the ...

R Panel
R Panel is a new PC software intended for computers based on Windows operating system. It allows to operate electromagnetic weighing modules of MAS R and ...

E2R System
One of the most versatile weighing systems selected by our customers is E2R WEIGHING RECORDS, the system is appreciated due to vast range of applications and pr ...

RADWAG Connect
RADWAG Connect is a new tool intended for mobile devices operation of which is based on Windows 10. The program facilitates communication via local network wit ...

USB cable (scale - printer)
Universal USB A-B cable. ...

RPANEL BOX
RPanel BOX is an innovative device intended for use with weighing modules in the MAS R and MPS R series and R series balances with WiFi and ethernet capabilitie ...

RS 232, RS 485 cables
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to a computer. Standard cable length: 1,7m Compatible with: - Scales operated by means of PU ...

Antistatic ionizer
Antistatic ionizer is used to remove overflow of mainly plus ions, and also minus ions from the load and elements of a balance and the environment. Electric ...

Holders for laboratory flasks
Radwag Laboratory Holders have been designed for faster and more convenient weighing. They ensure perfect and secure fixing of small vessels, both typical an ...