Autotest :

Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.

Dosing :

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Percent Weighing :

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Parts counting :

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Formulation :

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Newton unit measurement :

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics :

Statistics function registers and analyses performed measurements. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range etc

Checkweighing :

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors :

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Under-pan weighing :

The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.

GLP Procedures :

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing :

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination :

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Differential weighing :

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes. Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series. In such case standard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

Statistical Quality Control :

Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.

Displays
Additional LCD display in plastic housing and on a stand. The display enables presentation of the weighing result in a place distant from the balance wor ...

Barcode scanners
Power scanner D8330AR is a handheld device designed for exploitation in adverse industrial conditions. The scanner has an increased reading range and it is c ...

RS 232 cables (scale - Epson/Citizen printer)
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to an Epson or Citizen label printer. Standard cable length: 1,7m Compatible with: - Scales ...

Cigarette lighter receptacle power supply cables
Cable with jack for plugging to a car lighter 12V (PUE C31). Standard cable length: 1,7m Compatible with: - Scales operated by means of PUE C31 indicator - ...

Power Adapters
The power adapter ZR-02 is designed for powering a balance in areas with no access to mains. It features a built-in charger. The adapter enables op ...

R-LAB
R-Lab is an up-to-date program offering aquisition of measurements sent from RADWAG-manufactured balances, their presentation and statistical analysis. The prog ...

LabVIEW Driver
LabVIEW ?Radwag Balances & Scales? driver is used to support Radwag-manufactured weighing instruments operating in LabView environment. Since this driver was pr ...

Professional weighing table
A professional weighing table is designed to cooperate with microbalances, analytical balances and it is sucessfully used as a stand for pipettes calibration ...

RADWAG Development Studio
RADWAG Development Studio is a software intended for companies willing to develop their own tools for communication with RADWAG-manufactured weighing equipment....

Receipt printer
TM-T20II printer is a user-friendly device uncomplicated when it comes to its configuration and maintenance. The printer works with most of the operating systems. It offers a build-in power supply, USB cable, wall mainframe and conversion set....

Granite Antivibration tables
Table SAL/STONE/C is designed for ensuring stable operating conditions for high precision measurements. The table top is manufactured from polished granite and it is based on mild steel, metal construction.

Label Printers
Zebra’s G-Series compact desktop printer for print widths up to 4 inches delivers best-in-class speed and performance. From the basic GK™model to the feature-rich GX™model, the G-Series printers are reliable, durable, and flexible to fit almost any low- to mid-volume printing application and budget.

Protective cover for balances
Made of fabric, protects device housing against dust, dirt, etc.

RADWAG Remote Desktop
RADWAG Remote Desktop is a set of tools enabling operation of a weighing device by means of a computer, mobile phone or tablet.

Under-hook weighing rack
Under-hook weighing rack for AS and PS balances This image is for reference only. Product code: WX-002-0111 Request for quotation Overview A rack for under-hook weighing intended for balances AS and PS. The rack is designed for weighing loads requiring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

Balance Storage Case
Suitcase for PS.R, PS.3Y, PS.X2, WLC/A2 and WTC balances.

R.Barcode
The basic function of R.Barcode software is presentation of the data sent by barcode scanners connected to PC via USB or RS232. The software also works with the ...

E2R System
One of the most versatile weighing systems selected by our customers is E2R WEIGHING RECORDS, the system is appreciated due to vast range of applications and pr ...

RADWAG Connect
RADWAG Connect is a new tool intended for mobile devices operation of which is based on Windows 10. The program facilitates communication via local network wit ...

RS 232, RS 485 cables
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to a computer. Standard cable length: 1,7m Compatible with: - Scales operated by means of PU ...

Anti-draft Chamber for balances with a weighing pan 128x128mm
The anti-draft chamber is intended for balances featuring a weighing pan 128×128 mm. It is an optional equipment for balances operating in unfavourable ambie ...

Density determination kit
Density determination kit for determining density of solids and liquids is designed for cooperation with laboratory balances featuring 128×128 mm weighing pa ...

Audit Trail Reader
Audit Trail Reader is a freeware RADWAG-manufactured software supporting Audit Trail function available for 3Y, 4Y, HY10, WLY, WPY series weighing instruments. ...

Label Editor R02
Label Editor R02 is a software designed by RADWAG for creating labels to be used with scales based on terminals PUE C32, PUE C41H, PUE 5.15, PUE 5.19, PUE 7.1 ...

Parameter Editor
Parameter Editor is a modern and user-friendly software for easy and quick configuration of parameters. The software supports WLY, WPY, HY10, 3Y, 4Y weighing in ...

THBR 2.0 System - Ambient Conditions Monitoring
THBR sensor is a device measuring ambient conditions, it cooperates with a computer (1 sensor via USB 2.0 port); direct cooperation, ...

Automatic feeders
PA-04/H automatic feeder is dedicated for automatic dispensing of small objects, in particular pills, capsules and small mechanical components. The feeder en ...

3Y Database Editor
Database Editor 3Y is a freeware offered by RADWAG and intended to carry out database operations on balances 3Y series. The software enables reading database st ...