Dosing :

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.

Labelling :

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control :

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing :

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing :

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting :

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Peak hold :

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Formulation :

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

Newton unit measurement :

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Statistics :

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range etc

Checkweighing :

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR sensors :

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

Animal weighing :

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Differential weighing :

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes. Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series. In such case standard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

ALIBI Memory :

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings. The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name. The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory. Measurements saved to balance memory cannot be deleted. You can preview and print out the data saved to the ALIBI database.

Displays
Additional LCD display in plastic housing and on a stand. The display enables presentation of the weighing result in a place distant from the balance wor ...

Barcode scanners
Power scanner D8330AR is a handheld device designed for exploitation in adverse industrial conditions. The scanner has an increased reading range and it is c ...

RS 232 cables (scale - Epson/Citizen printer)
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to an Epson or Citizen label printer. Standard cable length: 1,7m Compatible with: - Scales ...

Cigarette lighter receptacle power supply cables
Cable with jack for plugging to a car lighter 12V (PUE C31). Standard cable length: 1,7m Compatible with: - Scales operated by means of PUE C31 indicator - ...

Power loop output
RADWAG power loop module 4-20mA is designed for conversion of digital form of mass readout into analog one. Power output is a passive module, i.e. requir ...

R-LAB
R-Lab is an up-to-date program offering aquisition of measurements sent from RADWAG-manufactured balances, their presentation and statistical analysis. The prog ...

LabVIEW Driver
LabVIEW ?Radwag Balances & Scales? driver is used to support Radwag-manufactured weighing instruments operating in LabView environment. Since this driver was pr ...

RAD-KEY
Establishing cooperation between a weighing instrument and a computer: replacing a comma with a dot (useful when exporting data to Excel spreadsheet); Hot key (i.e. function keys from F1 to F12) triggering mass readout from a weighing instrument; data acquired from a weighing instrument are read as text or numeric values. The latest software version: 1.1.0.7

RADWAG Development Studio
RADWAG Development Studio is a software intended for companies willing to develop their own tools for communication with RADWAG-manufactured weighing equipment....

Receipt printer
TM-T20II printer is a user-friendly device uncomplicated when it comes to its configuration and maintenance. The printer works with most of the operating systems. It offers a build-in power supply, USB cable, wall mainframe and conversion set....

Granite Antivibration tables
Table SAL/STONE/C is designed for ensuring stable operating conditions for high precision measurements. The table top is manufactured from polished granite and it is based on mild steel, metal construction.

Label Printers
Zebra’s G-Series compact desktop printer for print widths up to 4 inches delivers best-in-class speed and performance. From the basic GK™model to the feature-rich GX™model, the G-Series printers are reliable, durable, and flexible to fit almost any low- to mid-volume printing application and budget.

RADWAG Remote Desktop
RADWAG Remote Desktop is a set of tools enabling operation of a weighing device by means of a computer, mobile phone or tablet.

Stands, wall mounting kits and mounting brackets
A stand, based on a tripod for supporting scale's indicator installed on a cable. Mild steel or stainless steel version available. ...

R.Barcode
The basic function of R.Barcode software is presentation of the data sent by barcode scanners connected to PC via USB or RS232. The software also works with the ...

E2R System
One of the most versatile weighing systems selected by our customers is E2R WEIGHING RECORDS, the system is appreciated due to vast range of applications and pr ...

RADWAG Connect
RADWAG Connect is a new tool intended for mobile devices operation of which is based on Windows 10. The program facilitates communication via local network wit ...

RS 232, RS 485 cables
RS 232 cable for connecting a balance/scale (PUE C/31 indicator) to a computer. Standard cable length: 1,7m Compatible with: - Scales operated by means of PU ...

IN/OUT Cables
4 IN / 4 OUT cable (PUE 7.1). Standard cable length: 3m Compatible with: - Scales operated by means of PUE 7.1 terminal - PUE 7.1 terminal ...

Audit Trail Reader
Audit Trail Reader is a freeware RADWAG-manufactured software supporting Audit Trail function available for 3Y, 4Y, HY10, WLY, WPY series weighing instruments. ...

Label Editor R02
Label Editor R02 is a software designed by RADWAG for creating labels to be used with scales based on terminals PUE C32, PUE C41H, PUE 5.15, PUE 5.19, PUE 7.1 ...

Parameter Editor
Parameter Editor is a modern and user-friendly software for easy and quick configuration of parameters. The software supports WLY, WPY, HY10, 3Y, 4Y weighing in ...

Keypad, external switches
Buttons intended to remotely control the TARE and PRINT functions. The housing is made of plastic with a connecting cable 1,5 m in length. PT0021 - ...

F1 Mass Standard - knob weights without adjustment chamber, set
F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 50 g), plastic box. ...